Product Sector
Sort by Range

Cloud's traditional products hand built and sound tested to our exacting standards in Sheffield England

Cloud's CONTRACTOR SERIES is a value line of electronics and speakers targeted at entry solution and applications

Dante Network Accessories.

DLM-1 - Dante Line / Mic Input Module

The DLM-1 Series is a range of remote mic/line input modules for use in a Dante-compatible network a...

DLM-1A - Dante Line / Mic Input Module

The DLM-1A Series is a range of remote mic/line input modules for use in a Dante-compatible network ...

Analogue Remote Controls.

RL-1x8W & RL-1x8B - Remote Volume Level Control Plate

The RL-1x8 Multizone Remote Volume Level Controller with MUTE ALL Switch. Available in White and ...

RL-1W & RL-1B - Remote Volume Level Control Plate in Black or White

The RL-1 Remote Volume Level Control is available in Black or White Finish and is compatible with...

RL-1AW & RL-1AB - USA Remote Volume Level Control

The RL-1A Remote Volume Level Control is a VCA Controlled attenuated potentiomiter using a ALP devic...

RL-1DW & RL-1DB - USA Remote Volume Level Control (Decora)

The RL-1A Remote Volume Level Control is available in a Black or White Finish and is compatible with...

RL-1MW & RL-1MB - Remote Volume Level Media Control Plate in White or Black

REMAINING STOCK QUANTITY OF 84 IN WHITE ONLY The RL-1M Media Size (50mmx50mm) Remote Volume Leve...

RSL-4W & RSL-4B - Remote Source / Volume Level Select Plate

The RSL-4 Remote Music Source and Volume Level control plate is available in Black or White finis...

RSL-4AW & RSL-4AB - USA Remote Source / Volume Level Select Plate

The RSL-4 Remote Music Source and Volume Level control plate is available in Black or White finish a...

RSL-6W & RSL-6B - Remote Source / Volume Level Select Plate

The RSL-6 Remote Music Source and Volume Level control plate is available in Black or White finis...

RSL-6AW & RSL-6AB - USA Remote Source / Volume Level Select Plate

The RSL-6A Remote Music Source and Volume Level control plate is available in Black or White finish ...

RSL-6DW & RSL-6DB - USA Remote Source / Volume Level Select Plate (Decora)

The RSL-6A Remote Music Source and Volume Level control plate is available in Black or White finish ...

RSL-6x4 - Remote Music Source Select

The RSL-6x4 Multizone Remote Source Select & Volume Level Controller. Available in White and comp...

RSL-6x4A - USA Remote Music Source Select

The RSL-6x4A Multizone Remote Source Select & Volume Level Controller. Available in White and compat...

CVC-6 - 100V Attenuated Volume Control

The Cloud CVC-6 100V Attenuated Volume Control is part of the Contractor Series and is designed to s...

CVC-30 - 100V Attenuated Volume Control

The Cloud CVC-30 100V Attenuated Volume Control is part of the Contractor Series and is designed to ...

CVC-60 - 100V Attenuated Volume Control

The Cloud CVC-60 100V Attenuated Volume Control is part of the Contractor Series and is designed to ...

CVC-120 - 100V Attenuated Volume Control

The Cloud CVC-120 100V Attenuated Volume Control is part of the Contractor Series and is designed to...

Analogue Input Plates.

XLR-F1W & XLR-F1B - XLR Input Module - White / Black - Female

XLR Input Module on a Single Gang Wall Plate For Weatherproof/Outdoor Fittings Please See:&n...

XLR-M1W & XLR-M1B - XLR Input Module - White / Black - Male

XLR Input Module on a Single Gang Wall Plate For Weatherproof/Outdoor Fittings Please See:&nb...

Bluetooth Input Wall Plates.

BT-1FW & BT-1FB - Bluetooth Wireless Audio Module - Facility Port

The BT-1F is a remote wall-mounting input module for use with Cloud products fitted with an RJ45 F...

BT-1AFW & BT-1AFB - USA Bluetooth Wireless Audio Module for Facility Port

The BT-1AF is a remote wall-mounting input module for use with Cloud products fitted with an RJ45 ...

Digital and Ethernet Remote Controls.

CDR-3AW & CDR-3AB - Ethernet Remote Controller

Wall remote controller for CXA Series of amplifiers. "A" Version for USA backboxes, others are EU &...

CDR-3W & CDR-3B - Ethernet Remote Controller

Wall remote controller for CXA Series of amplifiers. "A" Version for USA backboxes, others are EU &...

RM-MX141M - Optional Remote Control

The RM-MX141M is the optional IR Remote Control for MX141M Media Strip Mixer....

CDR-1FW & CDR-1FB & CDR-1FS - Flush Mount Remote for DCM-1 / DCM1e

The CDR-1F is a flush-mount remote control panel for use with the Cloud DCM-1 & DCM1e Digital Contro...

CDR-1W & CDR-1B - Surface Remote for DCM-1 / DCM-1e

The CDR-1 is the surface-mount version of wall remote control for use with the DCM-1 and DCM1e Di...

Active Input Wall Plates.

L-1B & L-1W - Line Level Active Input Plate

The L-1 is an Active Line Input Plate allowing for easy connection of a single Line Input wit...

L-1DW & L-1DB - USA Line Level Active Input Plate (Decora)

The L-1 is an Active Line Input Plate allowing for easy connection of a single Line Input wit...

M-1B & M-1W - Mic Level Active Input Plate

The M-1 is an Active Microphone Input Plate allowing for easy connection of a single Microphone wi...

M-1DW & M-1DB - USA Mic Level Active Input Plate (Decora)

The M-1 is an Active Microphone Input Plate allowing for easy connection of a single Microphone wi...

LM-2AW & LM-2AB - USA Line/Mic/Remote Active Input Plate

The LM-2A is the USA 2 Gang variant of the LM-2. This Active Input Plate allows easy connecti...

LM-2W & LM-2B - Line/Mic/Remote Active Input Plate

The LM-2 comes in three fixing varients: LM-2 (UK 2 Gang), LM-2A (USA 2 Gang) & LM-2D (German)....

LM-2DW & LM-2DB - DE/NL Line/Mic/Remote Active Input Plate

The LM-2D is the anglo Dutch/German fixing variant of the LM-2. This Active Input Plate ...

FPA-1 - Facility Port Adapter

Designed as a comprehensive solution for retrospectively connecting any of Clouds Facility Po...

ME-1W & ME-1B - Microphone Input Module for DCM-1 / DCM-1e

The ME-1 Microphone Input Module provides a single balanced microphone input for the DCM1/DCM1e Digi...

ME-1AW & ME-1AB - USA Microphone Input Module for DCM-1 / DCM-1e

The ME-1 Microphone Input Module provides a single balanced microphone input for the DCM1/DCM1e Digi...

LE-1W & LE-1B - Line Input Module for DCM-1 / DCM-1e

The LE-1 Line Level Active Input Plate. Available in a Black or White Finish and compat...

LE-1AW & LE-1AB - USA Line Input Module for DCM-1 / DCM-1e

The LE-1 Line Level Active Input Plate. Available in a Black or White Finish and compatibl...

BE-1W & BE-1B - Balanced Input Module for DCM-1 / DCM-1e

The BE-1 Balanced Line Level Active Input Plate. Available in a Black or White Fin...

BE-1AW & BE-1AB - USA Balanced Input Module for DCM-1 / DCM-1e

The BE-1 Balanced Line Level Active Input Plate. Available in a Black or White Finish...

Speaker Accessories.

CS-3HEXGRILL-W & CS-3HEXGRILL-B - Cloud Series 3 inch Hexagonal Grille

The ZeroEdge™ grilles are magnetically attached for easy installation, and feature a completely se...

CS-3ROUNDGRILL-B CS-3ROUNDGRILL-W - 3inch Round Grille for CS-C3 Speakers

The ZeroEdge™ grilles are magnetically attached for easy installation, and feature a completely se...

CS-3SQGRILL-W & CS-3SQGRILL-B - Cloud Series 3 inch Square Grille

The ZeroEdge™ grilles are magnetically attached for easy installation, and feature a completely se...

CS-4TB-4P - Tile Bridge for 4 Inch Cloud Ceiling Speakers

Made from 3mm Galvanised Steel, the ceiling speaker Tile Bridge is primarily used to support ceiling...

CS-8SQGRILL-W - Cloud Series Square Grille

The ZeroEdge™ grilles are magnetically attached for easy installation, and feature a completely se...

CS-PI-10P - Ceiling Pre-Install Tilebridge (10 Pack)

The Pre-installation bracket is for when the speaker is being pre-installed into a Plasterboard ceil...

CS-TB-4P - Tile Bridge for 8 Inch Cloud Ceiling Speakers

Made from 3mm Galvanised Steel, the ceiling speaker Tile Bridge is primarily used to support ceil...

WB-P46B & WB-P46W - Pendant Speaker Wall Bracket

Optional wall mounting bracket set for CVS-P42T or CVS-P62T Pendant speakers. Available in Black or...

Transformers.

CXL-46T - 70/100V Transformer

The CXL-46T is an internal 120W 70/100V transformer which can be added to any of the non-T versio...

CXL-40T - 40W Toroidal Transformer

CXL40T - 40W 100/70 volt torodial transformer, compatible with 46/50, 36/50, CXA450 and CXA850....

CXL-50T - 50w Toroidal Transformer

Optional 50/70/100v High Quality Toroidal Transformer. For internal use with MA60 & MA60...

CXL-80T - 70/100V Transformer

The CXL-80T is an internal 80W - 70/100V transformer which can be added to the non-T versions of the...

CXL-100T - 100W Toroidal Transformer

The CXL100T is a 100W 100/70 Volt toroidal transformer, compatible with Cloud VTX-4120, CXA6, &nb...

CXL-200T - 200W Toroidal Transformer

The CXL-200T is a High Quality 200W 100V/70V toroidal transformer compatible with the Cloud VTX-4...

CXL-400T - 400W Toroidal Transformer

The CXL-400T is a 400W 100V/70V toroidal transformer compatible with the Cloud VTX-4400 amplifier...

CXL-3120 - 3 x 40W Transformer Module

3 x 40W 100V or 70V transformer module for internal use in 36/50....

CXL-4160 - 4 x 40W Transformer Module

CXL-4160 4 X 40W 100V or 70V transformer module for internal use in 46/50 and CXA450....

Rackmount Solutions.

CXL-1600 - Rack Mounting Housing

CXL-1600 is a high quality rack mounting housing designed to accept up to a maximum of eight toro...

CXL-800 - Rack Mounting Housing

CXL800 - High quality rack mounting housing designed to accept up to eight torodial transformers....

RE-L - Rack Mounting Housing Kit

Optional 19" Rackmount kit for fitting 1x MA60, MA60T or MA60Media Mixer Amplifiers into a s...

RE-S - Rack Mounting Housing Kit

Optional 19" Rackmount kit for fitting 2 x MA60, MA60T & MA60Media Mixer Amplifiers int...

HALF-U RACK KIT - Rack Mount Kit For 1/2 1U CXA Amplifiers

Optional Half-U rack kit for use with Cloud Electronics CXA125 / CXA2125 / CXA250 / CXA2250½1U...

REAR RACK KIT - Rear Mount Kit For 1/2U CXA Amplifiers

Optional Rear rack kit for use with Cloud Electronics CXA125 / CXA2125 / CXA1250 / CXA2250 ½1U...

DESKMOUNT KIT - Wall/Desk Mount Kit for 1/2 1U Amplifiers

Optional Deskmount kit for use with Cloud Electronics CXA125 / CXA2125 / CXA250 /CXA2250 ½1U a...

VCA Cards.

VCA-2 - 2 Channel VCA Card

VCA-2 is a 2 channel VCA card for remote level control of the CXA6 and CXA4 (disconinued)&nb...

Power Supplies.

PS-UK - UK External Power Supply

12V, AC, 500ma External Power Supply with a 2.1mm socket for CDR1, CDR1F, PM4, PM8, PM16, PM...

PS-EU - EU External Power Supply

12V, AC, 500ma External Power Supply with a 2.1mm socket for CDR1, CDR1F, PM4, PM8, PM16, PM...

PS-US - US External Power Supply

12V, AC, 500ma External Power Supply with a 2.1mm socket for CDR1, CDR1F, PM4, PM8, PM16...

RS-232 Modules.

CDI-S100 - Optional RS232 Module Card for CX462 Zone Mixer

The CDI-S100 is a compact single-board option card that fits inside the CX462 Audio System Cont...

CDI-S200 - Optional RS232 Module Card for CX263 Zone Mixer

The CDI-S200 is a single-board option card that fits inside the CX263 3Zone Stereo/Mono Mixe...

Ethernet & Web Cards.

CDI-CA2 - Optional 2ch Dante Card for CA Amplifier

Optional 2ch Dante card for CA Series Amplifiers The CDI-CA2 Dante network card is a retrofit opt...

CDI-CA4 - Optional 4ch Dante Card for CA Amplifier

Optional 4ch Dante card for CA Series Amplifiers The CDI-CA4 Dante network card is a retrofit opt...

CDI-CA8 - Optional 8ch Dante Card for CA Amplifier

Optional 8ch Dante card for CA Series Amplifiers The CDI-CA8 Dante network card is a retrofit opt...

CDI-CV2 - Optional 2ch Dante Card for CV Amplifier

Optional 2ch Dante card for CV Amplifiers The CDI-CV2 Dante network card is a retrofit option exc...

CDI-CV4 - Optional 4ch Dante Card for CV Amplifier

Optional 4ch Dante card for CV Amplifiers The CDI-CV4 Dante network card is a retrofit option exc...

CDI-CV8 - Optional 8ch Dante Card for CV Amplifier

Optional 8ch Dante card for CV Amplifiers The CDI-CV8 Dante network card is a retrofit option exc...

CDI-46 - Optional Digital Control Interface for the 46-120 Series Mixer Amplifiers

The CDI-46 is an option module that provides Digital Paging Option, Ethernet Interface and RS-232...

VTX-WM1 - Web Monitor Card - VTX Amp Series

The VTX-WM1 Web Monitor Card is a retro-fit option for the VTX 4-Channel Amplifier Series from Cl...

EQ Cards.

EQ - Cards for Amina AIWX and LFiT Loudspeakers

Provide CLOUD Amplifiers and Zone/Mixer products with the correct equalisation curve fo...

BOSE - Loudspeaker EQ Card

Bose® Loudspeaker EQ Modules - 40211, 502A, 502B, 502BEX, 80211, LT320211, LT420211, 940211, 970...

.