The Cloud VMA120 is an cost-effective mixer-amplifiers for use in all types of commercial premises. It has been designed to be as simple to install and operate as possible, but offers a useful range of features and configuration options. The units are mono power amplifiers combined with a simple mixer stage. The output may be used to drive either low-impedance loudspeakers directly (4 ohms minimum) or 25/70/100 V-line loudspeaker distribution systems.
Power output: 120 W/channel
Outputs suitable for either low-impedance (min. 4 ohm) or 25/70/100 V-line systems
Four stereo unbalanced line inputs (3 x RCA jack pairs, 1 x 3.5 mm TRS jack on front panel)
Rear panel line inputs have individual gain controls
Two balanced mic inputs (1 x multipin connector, 1 x Ό TRS jack), with individual preset gain controls
Front panel controls for mic and music levels, line input selection, mic EQ, master level and EQ
Mic input mute switches on front panel
Line 1 priority, enabled by front panel switch
Mic-over-music priority, enabled by front panel switch
15 V phantom power available at either mic input
100 Hz high-pass filter on each mic input
70 Hz high-pass filter in output stage, for use with 25/70/100 V-line systems
Fixed limiter prevents clipping
Front panel LED bargraph indicates output signal level
Over-temperature and output DC protection
230 V or 115 V operation
Forced-air cooling
| Manuals | VMA_Series_Manual_EN_v1.3.pdf | Open |
| Datasheet | VMA_Series_Datasheet_EN_v1.2.pdf | Open |
| Images | VMA120 Rear_V3.0.jpg | Open |
| Images | VMA120_Front_V3.0.jpg | Open |
| Technical Notes | Tech Note_TN-032_Phoenix_Wiring_Examples.pdf | Open |
| Thorne Leisure Centre | Open |
