Bluetooth Wireless Audio Module - Facility Port
BT-1FW & BT-1FB
The BT-1F is a remote wall-mounting input module for use with Cloud products fitted with an RJ45 Facility Port. The BT-1F enables compatible portable devices such as laptops, tablets and smartphones to stream audio wirelessly to the interface, and thereinto the audio system of the Zone where the interface is installed.
The BT-1F is exceptionally simple to install; the rear RJ45 connector is wired to one of the host unit’s Facility Ports with a single screened Cat 5 cable using standard shielded RJ45 connectors at each end. The Cat 5 cable carries DC power as well as balanced audio.
The BT-1F will route a mono sum (L+R) of the streamed audio to the host unit and is compatible with the following Cloud products which are fitted with RJ45 Facility Ports;
- Z4MK4 & Z8MK4 Zone Mixers
- 46-120, 46-120 and 46-120MEDIA Zone Mixing Amplifiers
- MA40F, MA40T and MA40E Mini Amplifiers
- MA80FT and MA80E Mini Amplifiers
- 46-80 and 46-80T Zone Mixing Amplifiers
- MPA120MK2 & MPA240MK2
Any product not equiped with a Facility Port connector can use an FPA-1 adaptor per Zone.
- BT-1_Manual_EN_v1.0.pdf
- BT-1_Datasheet_EN_v1.3.pdf
- APP NO. 049 - Huddle Space_MA40E_LM-2_BT-1_S4.pdf
- APP NO. 051 - Café Private Event Space_MA40F_LM-2_BT-1.pdf
- APP NO. 053 - Hositality Boxes Centralised_Z8MK4_CXA450_LM-2_BT-1.pdf
- APP NO. 055 - Training Room_DCM1e_VTX4120_ME-1_BT-1_S6.pdf
- APP NO. 056 - School Airnasium_MPA120_BT-1_FPA-1_CS-S6.pdf
- APP NO. 057 - FPA-1_CX263_BT-1_FPA-1_RL-1AB.pdf
- APP NO. 063 - Boutique, Cafe, Salon, Shop_MA80E_CS-C4_LM-2_BT-1.pdf
- APP NO. 064 - Car Showroom_CV8125_DCM1e_PM-8SA_LM-2_BT-1.pdf
- APP NO. 065 - Adding Additional Zones using Aux Out_CV8125_MA80FT_LM-2_BT1.pdf
- Bluetooth Licence Certificate_31JAN2018.pdf
- APP NO. 069 HoW_MPA240MK2_MA40F_BT-1.pdf
- APP NO. 062 - Video Conferencing Workspace_MA80E_CS-S4_LM-2_BT-1.pdf
- BT-1FW (White) & BT-1FB (Black)
- Remote Bluetooth input module for Cloud host units with with Facility Port Capability
- Easy connection to host unit via screened Cat 5 cable (up to 100 m)
- Uses single-button Bluetooth “pairing” mode for secured operation
- Alternative “unsecured” mode: configurable at installation
- Each module may have one of 16 unique identifiers to differentiate receivers in areas where multiple modules are installed
- RF power level adjustment to minimise risk of accidental inter-room connection
- Bicolour LED indicating connection progress and streaming activity
- May be daisy-chained to remote input modules (e.g., LM-2) in same Zone
- RSL-6 or RL-1 remote plates may be daisy-chained to BT-1F
- UK versions mount into a standard single-gang UK-style electrical back box (85 x 85 mm) and require a back box depth of 35 mm minimum